4150 EQATIP HOLDER 1"

4150 EQATIP HOLDER 1"

Part #: 350-4150

Request 3D Model

Request 3D Model


Equatip Dual Tip Holders make two welds per machine stroke, increasing efficiency. Water cooling is delivered to each tip to increase electrode life. The tips squarely contact the work, unlike Teeter Tips. An internal roller equalizes the current and pressure between the electrodes.

RMWA Class 2 material is high conductivity and high strength alloy recommended for structural, current carrying secondary components and electrode holders. This is a heat treatable alloy used in the fully heat treated condition.

  • The overal length of the part is 7.3125 IN.
  • The body width is 2.5 IN
  • The part mounts via a 1 IN diameter shank
  • The part holds 2 tips via 5RW standard tapers which are suitable for weld forces ranging between 800 to 1500 pounds of force.
  • The electrodes are spaced 1.5 IN

Specifications

RWMA Material Type RWMA Class 2
Engagement to Holder 1 IN diameter shank
Electrode Engagement 5RW
Overall Length 7.31250
Body Length 2.8750
Body Width 2.50000
Body Thickness 1.00000
Shank Length 4.000
Electrode Spacing 1.500
Unit of Measure IN

Notice for California Residents

WARNING: Cancer and Reproductive Harm WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov