4010 EQUA-PRESS HOLD.1"

Part #: 350-4010

Request 3D Model

The Equa-Press Dual Tip Holders make two identical welds at once, increasing efficiency. When it contacts the workpiece, the forging pressure is automatically equalized between the workpieces regards of variations in work thickness or electrode wear (up to 3/16").

RMWA Class 2 material is high conductivity and high strength alloy recommended for structural, current carrying secondary components and electrode holders. This is a heat treatable alloy used in the fully heat treated condition.

The overal length of the part is 10.25 IN.
The body width is 4 IN
The part mounts via a 1 IN diameter shank
The part holds 2 tips via 5RW standard tapers which are suitable for weld forces ranging between 800 to 1500 pounds of force.
The electrodes are spaced 2 IN

Specifications

RWMA Material Type	RWMA Class 2
Engagement to Holder	1 IN diameter shank
Electrode Engagement	5RW
Overall Length	10.25000
Body Length	3.2500
Body Width	4.00000
Body Thickness	2.00000
Shank Length	4.000
Electrode Spacing	2.000
Unit of Measure	IN