4013 EQUA-PRESS HOLD PM

4013 EQUA-PRESS HOLD PM

Part #: 350-4013

Request 3D Model

Request 3D Model


The Equa-Press Dual Tip Holders make two identical welds at once, increasing efficiency. When it contacts the workpiece, the forging pressure is automatically equalized between the workpieces regards of variations in work thickness or electrode wear (up to 3/16").

RMWA Class 2 material is high conductivity and high strength alloy recommended for structural, current carrying secondary components and electrode holders. This is a heat treatable alloy used in the fully heat treated condition.

  • The overal length of the part is 4.875 IN.
  • The body width is 4 IN
  • The part mounts via a 7 x 7 IN plate
  • The part holds 2 tips via 5RW standard tapers which are suitable for weld forces ranging between 800 to 1500 pounds of force.
  • The electrodes are spaced 2 IN

Specifications

RWMA Material Type RWMA Class 2
Engagement to Holder 7 x 7 IN plate
Electrode Engagement 5RW
Overall Length 4.87500
Body Length 3.2500
Body Width 4.00000
Body Thickness 2.00000
Electrode Spacing 2.000
Unit of Measure IN

Notice for California Residents

WARNING: Cancer and Reproductive Harm WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov