4016 EQUA-PRESS HOLD 1-1/4
Part #: 350-4016
Request 3D Model
The Equa-Press Dual Tip Holders make two identical welds at once, increasing efficiency. When it contacts the workpiece, the forging pressure is automatically equalized between the workpieces regards of variations in work thickness or electrode wear (up to 3/16").
RMWA Class 2 material is high conductivity and high strength alloy recommended for structural, current carrying secondary components and electrode holders. This is a heat treatable alloy used in the fully heat treated condition.
- The overal length of the part is 8.375 IN.
- The body width is 4 IN
- The part mounts via a 1.25 IN diameter shank
- The part holds 2 tips via 5RW standard tapers which are suitable for weld forces ranging between 800 to 1500 pounds of force.
- The electrodes are spaced 2 IN
See ways to use this part
Click the video title to watch on YouTube
Specifications
| RWMA Material Type | RWMA Class 2 |
|---|---|
| Engagement to Holder | 1.25 IN diameter shank |
| Electrode Engagement | 5RW |
| Overall Length | 8.37500 |
| Body Length | 3.7500 |
| Body Width | 4.00000 |
| Body Thickness | 2.00000 |
| Shank Length | 4.000 |
| Electrode Spacing | 2.000 |
| Unit of Measure | IN |
Notice for California Residents
WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov
