4053 EQUATIP HOLDER 5RW

4053 EQUATIP HOLDER 5RW

Part #: 350-4053

Request 3D Model

Request 3D Model


Equatip Dual Tip Holders make two welds per machine stroke, increasing efficiency. Water cooling is delivered to each tip to increase electrode life. The tips squarely contact the work, unlike Teeter Tips. An internal roller equalizes the current and pressure between the electrodes.

RMWA Class 2 material is high conductivity and high strength alloy recommended for structural, current carrying secondary components and electrode holders. This is a heat treatable alloy used in the fully heat treated condition.

  • The overal length of the part is 7.3125 IN.
  • The body width is 2 IN
  • The part mounts via a 5RW
  • The part holds 2 tips via 5RW cap tapers which are suitable for weld forces ranging between 800 to 1500 pounds of force.
  • The electrodes are spaced 1 IN

Specifications

RWMA Material Type RWMA Class 2
Electrode Engagement 5RW Cap Taper
Overall Length 7.31250
Body Length 2.8750
Body Width 2.00000
Body Thickness 1.00000
Shank Length 4.000
Electrode Spacing 1.000
Unit of Measure IN

Notice for California Residents

WARNING: Cancer and Reproductive Harm WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov