4151 EQUATIP HOLDER 1-1/4
Part #: 350-4151
Request 3D Model
Equatip Dual Tip Holders make two welds per machine stroke, increasing efficiency. Water cooling is delivered to each tip to increase electrode life. The tips squarely contact the work, unlike Teeter Tips. An internal roller equalizes the current and pressure between the electrodes.
RMWA Class 2 material is high conductivity and high strength alloy recommended for structural, current carrying secondary components and electrode holders. This is a heat treatable alloy used in the fully heat treated condition.
- The overal length of the part is 7.3125 IN.
- The body width is 2.5 IN
- The part mounts via a 1.25 IN diameter shank
- The part holds 2 tips via 5RW cap tapers which are suitable for weld forces ranging between 800 to 1500 pounds of force.
- The electrodes are spaced 1.5 IN
|RWMA Material Type||RWMA Class 2|
|Engagement to Holder||1.25 IN diameter shank|
|Electrode Engagement||5RW Cap Taper|
|Unit of Measure||IN|
Notice for California Residents
WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov