M4-10W 4MM CAP

M4-10W 4MM CAP

Part #: 175-8004-10W

Request 3D Model

Request 3D Model


Metric Nut Heads are a component of the Electrode Assembly for projection welding nuts. The Head is the piece of the assembly that makes contact with the workpiece. This component is designed to be easily replaced when the weld face is worn. The Head has a through hole for a insulated metric pin.

A refractory metal face is made of RWMA Class 11 (75% tungsten, 25% copper) (ASTM 702 C1D) is brazed onto the base material. This face is typically used for welding at higher pressure and heat common with projection welding.

  • The overall length is 0.670 IN
  • The hole diameter is 0.197 IN
  • The part mounts to the holder via M18 threads.
  • The weld face is 1 IN
  • The part holds a 4 mm pin

Specifications

Face Refractory Material RWMA Class 11 - 10W
RWMA Material Type RWMA Class 2 - C18200
Thread M18
Overall Length 0.67000
Diameter 1
Hole Diameter 0.19700
Refractory Material Thickness 0.250
Unit of Measure IN
Chamfer Angle at Base 60.0

Notice for California Residents

WARNING: Cancer and Reproductive Harm WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov