M6-10W 6MM CAP
Part #: 175-8006-10W
Request 3D Model
Metric Nut Heads are a component of the Electrode Assembly for projection welding nuts. The Head is the piece of the assembly that makes contact with the workpiece. This component is designed to be easily replaced when the weld face is worn. The Head has a through hole for a insulated metric pin.
A refractory metal face is made of RWMA Class 11 (75% tungsten, 25% copper) (ASTM 702 C1D) is brazed onto the base material. This face is typically used for welding at higher pressure and heat common with projection welding.
- The overall length is 0.670 IN
- The hole diameter is 0.276 IN
- The part mounts to the holder via M18 threads.
- The weld face is 1 IN
- The part holds a 6 mm pin
|Face Refractory Material||RWMA Class 11 - 10W|
|RWMA Material Type||RWMA Class 2 - C18200|
|Refractory Material Thickness||0.250|
|Unit of Measure||IN|
|Chamfer Angle at Base||60.0|
Notice for California Residents
WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov