TE-25 TUFF CAP

TE-25 TUFF CAP

Part #: 119-0025

Request 3D Model

Request 3D Model


Male caps are a cost effective solution for automated environments because the caps can be changed quickly when the face wears out. The design has superior water flow properties compared to female caps. Thus, males are an ideal choice for high heat applications.

RMWA Class 2 (C18200) material - a copper, chromium material recommend for high production operations spot welding hot or cold rolled steels, galvanized and coated materials.

  • The overall length is 1.2500 IN
  • The outside diameter is 0.625 IN
  • The part mounts via a 5RW cap taper which is suitable for weld forces ranging between 800 to 1500 pounds of force.
  • The E nose or Truncated face tip is an efficient design that does not trap weld flash on the face and may reduce mushrooming.
  • The weld face is 0.25 IN
  • The taper length is 0.500 IN

Specifications

RWMA Material Type RWMA Class 2 - C18200
RWMA Taper 5RW Cap Taper
Nose Type E
Overall Length 1.25000
Outer Diameter 0.62500
Welding Face Dia. 0.25
Nose Length 0.7500
Taper Length 0.5000
Unit of Measure IN
Offset / Truncated Angle 45.0

Notice for California Residents

WARNING: Cancer and Reproductive Harm WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov