FP-2532-10 BENT TIP

FP-2532-10 BENT TIP

Part #: 167-5540

Request 3D Model

Request 3D Model


Standard Single Bend tips are an economic solution to weld in a tight area or hard to reach area such as a flange or corner.

RMWA Class 2 (C18200) material - a copper, chromium material recommend for high production operations spot welding hot or cold rolled steels, galvanized and coated materials.

  • The overall length is 3.125 IN
  • The outside diameter is 0.625 IN
  • The part mounts via a 5RW standard taper which is suitable for weld forces ranging between 800 to 1500 pounds of force.
  • The A nose or Pointed face tip is a general purpose weld face suitable for most spot welding applications.
  • The weld face is 0.25 IN
  • The offset is 0.625 IN
  • The engagement angle is 35 Degrees

Specifications

RWMA Material Type RWMA Class 2 - C18200
RWMA Taper 5RW
Nose Type A
Overall Length 3.12500
Outer Diameter 0.62500
Welding Face Dia. 0.25
Offset 0.6250
Inner Diameter 0.62500
Unit of Measure IN
Bend Angle (Deg) 35.0

Notice for California Residents

WARNING: Cancer and Reproductive Harm WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov