D-1511 TIP

D-1511 TIP

Part #: 137-1511

Request 3D Model


Straight tips are durable and long lasting making them a good choice for use with any standard rocker arm, press type or bench mounted machine. The deep water hole ensures proper cooling of the weld face. They are a great choice for a job shop that run many different products on the same machines.

RMWA Class 1 (C15000) material - a copper zirconium material recommended for spot welding coated materials and highly conductive materials such as aluminum, magnesium alloys, brass and bronze.

  • The overall length is 2.75 IN
  • The outside diameter is 0.625 IN
  • The part mounts via a 5RW standard taper which is suitable for weld forces ranging between 800 to 1500 pounds of force.
  • The D nose or Offest face tip is used for welds in tight spaces typically on a flange or tight corner. It reqiures manual orientation during setup.
  • The weld face is 0.25 IN

See ways to use this part

Click the video title to watch on YouTube


Specifications

RWMA Material Type RWMA Class 1 - C15000
RWMA Taper 5RW
Nose Type D
Overall Length 2.75000
Outer Diameter 0.62500
Welding Face Dia. 0.25
Water Hole Dia. 0.37500
Water Hole Depth 2.000
Unit of Measure IN
Offset / Truncated Angle 30.0