D-2708 TIP

D-2708 TIP

Part #: 138-2708

Request 3D Model

Request 3D Model


Straight tips are durable and long lasting making them a good choice for use with any standard rocker arm, press type or bench mounted machine. The deep water hole ensures proper cooling of the weld face. They are a great choice for a job shop that run many different products on the same machines.

RMWA Class 2 (C18200) material - a copper, chromium material recommend for high production operations spot welding hot or cold rolled steels, galvanized and coated materials.

  • The overall length is 2.00 IN
  • The outside diameter is 0.875 IN
  • The part mounts via a 7RW standard taper which is suitable for weld forces ranging between 2,000 to 2,400 pounds of force.
  • The D nose or Offest face tip is used for welds in tight spaces typically on a flange or tight corner. It reqiures manual orientation during setup.
  • The weld face is 0.312 IN

Specifications

RWMA Material Type RWMA Class 2 - C18200
RWMA Taper 7RW
Nose Type D
Overall Length 2.00000
Outer Diameter 0.87500
Welding Face Dia. 0.3125
Water Hole Dia. 0.50000
Water Hole Depth 1.250
Unit of Measure IN
Offset / Truncated Angle 30.0

Notice for California Residents

WARNING: Cancer and Reproductive Harm WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov