E-1614 TIP

E-1614 TIP

Part #: 140-1614

Request 3D Model

Request 3D Model


Straight tips are durable and long lasting making them a good choice for use with any standard rocker arm, press type or bench mounted machine. The deep water hole ensures proper cooling of the weld face. They are a great choice for a job shop that run many different products on the same machines.

RMWA Class 1 (C15000) material - a copper zirconium material recommended for spot welding coated materials and highly conductive materials such as aluminum, magnesium alloys, brass and bronze.

  • The overall length is 3.50 IN
  • The outside diameter is 0.750 IN
  • The part mounts via a 6RW standard taper which is suitable for weld forces ranging between 1,500 to 2,000 pounds of force.
  • The E nose or Truncated face tip is an efficient design that does not trap weld flash on the face and may reduce mushrooming.
  • The weld face is 0.281 IN

Specifications

RWMA Material Type RWMA Class 1 - C15000
RWMA Taper 6RW
Nose Type E
Overall Length 3.50000
Outer Diameter 0.75000
Welding Face Dia. 0.28125
Water Hole Dia. 0.43750
Water Hole Depth 2.750
Unit of Measure IN
Offset / Truncated Angle 45.0