Part #: 141-2406
Request 3D Model
Straight tips are durable and long lasting making them a good choice for use with any standard rocker arm, press type or bench mounted machine. The deep water hole ensures proper cooling of the weld face. They are a great choice for a job shop that run many different products on the same machines.
RMWA Class 2 (C18200) material - a copper, chromium material recommend for high production operations spot welding hot or cold rolled steels, galvanized and coated materials.
- The overall length is 1.50 IN
- The outside diameter is 0.500 IN
- The part mounts via a 4RW standard taper which is suitable for weld forces ranging between 200 to 800 pounds of force.
- The F nose or Radius face tip is typically used for alumium welding because it provides point contact to break through the aluminum oxide layer on the surface while still providing an adequate weldface to manage the current density during welding.
- The weld face is 2 inch radius
|RWMA Material Type||RWMA Class 2 - C18200|
|Welding Face Dia.||2 inch radius|
|Water Hole Dia.||0.28100|
|Water Hole Depth||1.000|
|Unit of Measure||IN|
Notice for California Residents
WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov