F-2710 TIP

F-2710 TIP

Part #: 141-2710

Request 3D Model

Straight tips are durable and long lasting making them a good choice for use with any standard rocker arm, press type or bench mounted machine. The deep water hole ensures proper cooling of the weld face. They are a great choice for a job shop that run many different products on the same machines.

RMWA Class 2 (C18200) material - a copper, chromium material recommend for high production operations spot welding hot or cold rolled steels, galvanized and coated materials.

  • The overall length is 2.50 IN
  • The outside diameter is 0.875 IN
  • The part mounts via a 7RW standard taper which is suitable for weld forces ranging between 2,000 to 2,400 pounds of force.
  • The F nose or Radius face tip is typically used for alumium welding because it provides point contact to break through the aluminum oxide layer on the surface while still providing an adequate weldface to manage the current density during welding.
  • The weld face is 7 inch radius

See ways to use this part

Click the video title to watch on YouTube


RWMA Material Type RWMA Class 2 - C18200
RWMA Taper 7RW
Nose Type F
Overall Length 2.50000
Outer Diameter 0.87500
Welding Face Dia. 7 inch radius
Water Hole Dia. 0.50000
Water Hole Depth 1.750
Unit of Measure IN

Notice for California Residents

WARNING: Cancer and Reproductive Harm WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov