FD-1426-20 BENT TIP

FD-1426-20 BENT TIP

Part #: 165-2200

Request 3D Model

Request 3D Model


Standard Double Bend Electrodes are an economic solution to weld in a tight area or hard to reach area such as a flange or corner. This part has water cooling all the way to the nose which may enable them outlast cast or forged tips with a similar geometry.

RMWA Class 1 (C15000) material - a copper zirconium material recommended for spot welding coated materials and highly conductive materials such as aluminum, magnesium alloys, brass and bronze.

  • The overall length is 2.38 IN
  • The outside diameter is 0.500 IN
  • The part mounts via a 4RW standard taper which is suitable for weld forces ranging between 200 to 800 pounds of force.
  • The D nose or Offest face tip is used for welds in tight spaces typically on a flange or tight corner. It reqiures manual orientation during setup.
  • The weld face is 0.188 IN
  • The offset is 1.25 IN

Specifications

RWMA Material Type RWMA Class 1 - C15000
RWMA Taper 4RW
Nose Type D
Overall Length 2.37500
Outer Diameter 0.50000
Welding Face Dia. 0.188
Offset 1.2500
Water Hole Dia. 0.28125
Taper to Bend Length 1.0000
Bend to Nose Length 0.7500
Unit of Measure IN