TG-2518 SHANK

TG-2518 SHANK

Part #: 161-2518

Request 3D Model

Request 3D Model


Straight shanks for male caps are a cost effective way to utilize caps on any standard rocker arm, press type, robot or bench mounted machine. The shank has a water hole through the entire part to ensure the cap is properly cooled.

RMWA Class 2 (C18200) material - a copper, chromium material recommend for high production operations spot welding hot or cold rolled steels, galvanized and coated materials.

  • The overall length is 4.50 IN
  • The outside diameter is 0.625 IN
  • The part mounts via a 5RW standard taper which is suitable for weld forces ranging between 800 to 1500 pounds of force.
  • The part holds a subcomponent via a 5RW cap taper which is suitable for weld forces ranging between 800 to 1500 pounds of force.
  • The assembled length is 5.25 IN

Specifications

RWMA Material Type RWMA Class 2 - C18200
RWMA Base Taper 5RW
RWMA Cap Taper 5RW Cap Taper
Overall Length 4.50000
Outer Diameter 0.62500
Inner Diameter 0.37500
Assembled Length 5.2500
Unit of Measure IN

Notice for California Residents

WARNING: Cancer and Reproductive Harm WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov