Part #: 190-9559
Request 3D Model
Electrode Angle Adapters are used to improve the holder life and flexibility by allowing users to select different angles for tooling setups. The adapter can also be replaced when the taper wears out.
RMWA Class 2 material is high conductivity and high strength alloy recommended for structural, current carrying secondary components and electrode holders. This is a heat treatable alloy used in the fully heat treated condition.
- The overall length is 2.000 IN
- The part width is 1.000 IN
- The part mounts via a 5RW standard taper which is suitable for weld forces ranging between 800 to 1500 pounds of force.
- The part holds a subcomponent via a 5RW standard taper which is suitable for weld forces ranging between 800 to 1500 pounds of force.
- The body length is 1.250 IN
- The offset is 1.250 IN
- The engagement angle is 90 Degrees
|RWMA Material Type
|RWMA Class 2
|Pipe Thread or Taper
|Width of Body
|Unit of Measure
|Angle of Engagement (deg)
Notice for California Residents
WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov