OE-1254-490 OFFSET HOLDER

OE-1254-490 OFFSET HOLDER

Part #: 335-0130

Request 3D Model

Request 3D Model


Standard Offset holders are designed to optimize tool life. The holder comes with a threaded electrode adapter which can be replaced when the taper wears out. These holders are commonly used with Rocker Arm and Pedestal Type welders.

RMWA Class 2 material is high conductivity and high strength alloy recommended for structural, current carrying secondary components and electrode holders. This is a heat treatable alloy used in the fully heat treated condition.

  • The mounting shank length is 3.500 IN
  • The mounting shank diameter is 1.25 IN
  • The part holds a subcomponent via a 4RW standard taper which is suitable for weld forces ranging between 200 to 800 pounds of force.
  • The offset is 4 IN
  • The engagement angle is 90 Degrees
  • Ejector Type Part

Specifications

RWMA Material RWMA Class 2
Shank Diameter 1.25
Adapter Tip Socket (RWMA Taper) 4RW
Offset 4.0000
Shank Length 3.500
Unit of Measure IN
Socket Angle 90.0
Ejector Type Yes

Notice for California Residents

WARNING: Cancer and Reproductive Harm WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov