SE-4411-1 SHANK TIP

SE-4411-1 SHANK TIP

Part #: 170-4411

Request 3D Model

Request 3D Model


Straight Shank Tips are designed for use with Variable Offset Holders. Users can modify the offset by positioning the tip in place then tightening the set screw to lock the tip in position.

RMWA Class 2 (C18200) material - a copper, chromium material recommend for high production operations spot welding hot or cold rolled steels, galvanized and coated materials.

  • The overall length is 3.000 IN
  • The part mounts via a 0.625 IN diameter
  • The B nose or Dome face tip is the most commonly used weldface because the design accomodates modest misalignment problems as contact can still be made on the radius during welding.
  • The weld face is 0.25 IN
  • The offset is 1.000 IN
  • The engagement angle is 60 Degrees

Specifications

RWMA Material Type RWMA Class 2 - C18200
Shank Enagement Dia. 0.625 IN diameter
Nose Type B
Overall Length 3.00000
Weldface Dia. 0.25
Offset 1.0000
Unit of Measure IN
Nose Engagement Angle 60.0

Notice for California Residents

WARNING: Cancer and Reproductive Harm WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov