SE-4409-2 SHANK TIP
Part #: 170-4419
Request 3D Model
Straight Shank Tips are designed for use with Variable Offset Holders. Users can modify the offset by positioning the tip in place then tightening the set screw to lock the tip in position.
RMWA Class 2 (C18200) material - a copper, chromium material recommend for high production operations spot welding hot or cold rolled steels, galvanized and coated materials.
- The overall length is 3.000 IN
- The part mounts via a 0.625 IN diameter
- The D nose or Offest face tip is used for welds in tight spaces typically on a flange or tight corner. It reqiures manual orientation during setup.
- The weld face is 0.25 IN
- The offset is 2.000 IN
- The engagement angle is 90 Degrees
|RWMA Material Type||RWMA Class 2 - C18200|
|Shank Enagement Dia.||0.625 IN diameter|
|Unit of Measure||IN|
|Nose Engagement Angle||90.0|
Notice for California Residents
WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov