Part #: 170-4424
Request 3D Model
Straight Shank for Tuff Caps are designed for use with Variable Offset Holders and allow users to modify the offset by positioning the tip in place then tightening the set screw to lock the tip in place. The shanks are available with different engagement angles to provide maximimum flexibility.
RMWA Class 2 (C18200) material - a copper, chromium material recommend for high production operations spot welding hot or cold rolled steels, galvanized and coated materials.
- The overall length is 3.000 IN
- The part mounts via a 0.625 IN diameter
- The part holds a female cap via a 5RW cap taper which is suitable for weld forces ranging between 800 to 1500 pounds of force.
- The offset is 1.000 IN
- The engagement angle is 90 Degrees
|RWMA Material Type||RWMA Class 2 - C18200|
|Shank Enagement Dia.||0.625 IN diameter|
|Taper for Cap||5RW Cap Taper|
|Unit of Measure||IN|
|Angle of Engagement||90.0|
Notice for California Residents
WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov