Trispacer Triple Tip Holder

Tuffaloy Trispacer Triple HolderTuffaloy Trispacer Triple Holder Diagram

The Trispacer tip holder will make three spot welds at one time, automatically splitting the current and the pressure equally between the three tips. In doing so, it compensates for variations in work thicknesses and electrode wear-up to 3/16-in.

The three tip-holder barrels (#5 RW) are equidistant from one another, all falling on a 1-5/8-in. diameter circle (in the standard model shown). Using straight tips the weld pattern would form an equilateral triangle. However, the weld pattern can be widely varied by using standard or special bent tips. In fact, the three welds can be made in a straight line.

The Trispacer Holder works in the same simple, mechanical way as the Equa-Press Holder: The electrode holding barrels have a limited up-and-down movement, to accommodate work conditions, and are adjusted to deliver equal pressure by the cone-shaped equalizing device in the housing. All current-carrying parts are made of RWMA copper alloys. It is made in two styles: to mount directly to the platen of press-type welders, and with shanks to fit in welder arms.


U. S. Pat. No. 3,558,848

PartDescription RWMA Material Type Engagement to Holder Electrode Engagement Overall Length Outer Diameter Body Length Unit of Measure
4040 TRI SPACER HOLD 1" RWMA Class 2 1 IN diameter shank 5RW 8.87500 3.00000 3.0000 IN
4041 TRI SPACER HOLD 1-1/4 RWMA Class 2 1.25 IN diameter shank 5RW 8.87500 3.00000 3.0000 IN
4042 TRI SPACER HOLD 1-1/2 RWMA Class 2 1.5 IN diameter shank 5RW 8.87500 3.00000 3.0000 IN
4043 TRI SPACER HOLD PM RWMA Class 2 3.5 x 7 inch plate 5RW 5.37500 3.00000 3.0000 IN