Standard Double Bend Electrode

Tuffaloy Standard Double Bends Header

Standard Double Bend Electrodes are an economic solution to weld in a tight area or hard to reach area such as a flange or corner. This part has water cooling all the way to the nose which may enable them outlast cast or forged tips with a similar geometry.

Water tubes can be included upon request to improve cooling of the tip.

Part	Description	RWMA Material Type	RWMA Taper	Nose Type	Overall Length	Outer Diameter	Welding Face Dia.	Offset	Water Hole Dia.	Taper to Bend Length	Bend to Nose Length	Unit of Measure
167-3180	FD-2526-12 BENT TIP	RWMA Class 2 - C18200	4RW	D	2.37500	0.50000	0.188	0.7500	0.28125	0.8750	0.8750	IN
167-3360	FD-25212-8 BENT TIP	RWMA Class 2 - C18200	5RW	D	2.75000	0.50000	0.25	0.5000	0.28125	1.0000	1.0000	IN
167-3400	FD-25212-16 BENT TIP	RWMA Class 2 - C18200	5RW	D	2.75000	0.62500	0.25	1.0000	0.28125	1.0000	1.0000	IN
167-3400-T	FD-25212-16-T BENT TIP	RWMA Class 2 - C18200	5RW	D	2.75000	0.50000	0.25	1.0000	0.28125	1.0000	1.0000	IN
167-3480	FD-2530-8 BENT TIP	RWMA Class 2 - C18200	5RW	D	3.00000	0.50000	0.25	0.5000	0.28125	1.1250	1.2500	IN
167-3520	FD-2530-16 BENT TIP	RWMA Class 2 - C18200	5RW	D	3.00000	0.50000	0.25	1.0000	0.28125	1.0000	1.0000	IN
167-3580	FD-2536-20 BENT TIP	RWMA Class 2 - C18200	5RW	D	3.37500	0.50000	0.25	1.2500	0.28125	1.0000	1.0000	IN
167-3580-T	FD-2536-20-T BENT TIP	RWMA Class 2 - C18200	5RW	D	3.37500	0.50000	0.25	1.2500	0.28125	1.0000	1.0000	IN
167-3620	FD-2538-16 BENT TIP	RWMA Class 2 - C18200	5RW	D	3.50000	0.50000	0.25	1.0000	0.28125	1.0000	1.0000	IN